skip to Main Content

Smart Vibration Monitor 9034 & 9038 Online/Fixed Vibration Monitoring. Single low-cost unit monitors plant with local alarms, connects to high functionality PC analysis software.

Smart Vibration Monitor 9034 & 9038 Online/Fixed Vibration Monitoring
9034 & 9038 Smart Vibration Monitor
  • Extremely cost effective – lowest cost/channel industrial vibration monitor/analyser
  • Very easy to set up using Smart Vibration Monitor PC software
  • 24/7 monitoring of critical plant operations
  • 4 accelerometer channel & 8 accelerometer channel versions
  • 24VDC (relay drive) switched output for each channel (warning/critical, g or velocity)
  • 4 to 20mA output for each channel (g or velocity)
  • Temperature input
  • Tacho Input
  • USB for connection to Smart Vibration Monitor PC software
  • Ethernet socket for network connection

4 Channel 9034: £1,195.00 RRP exc. VAT

8 Channel 9038: £1,495.00 RRP exc. VAT

Where to Buy TPI Products

The Smart Vibration Monitor 9034 and Smart Vibration Monitor 9038 are the new generation of low price-high performance installed vibration analysers from TPI. With up to 8 accelerometer inputs, 8 digital outputs, 8 analogue outputs, temperature and tacho inputs as well as USB and Ethernet connectivity the Smart Vibration Monitor 9034 and Smart Vibration Monitor 9038 modules offer unrivaled price/per channel performance. The analysers can be used in several different ways:

  • Standalone Operation: Connect up to 8 accelerometers and up to 8 relays and instantaneously monitor and alarm on-key vibration points. Using the included Smart Vibration Monitor PC software the alarms can each independently be set to trigger on/either a velocity level or a g level. If a tacho is connected, a speed range can be set so as not to activate during machine start-up or shut-down.
  • Legacy Systems Operation: for each connected accelerometer, the Smart Vibration Monitor units can also output levels of vibration (g or velocity) as 4 to 20mA signals for connection to existing monitoring systems such as PLCs, etc.
  • PC Operation: If a laptop/PC is connected via a USB cable, up to 64 modules can be monitored and the vibration levels displayed on screen. With the PC connected more detailed vibration analysis can be carried out with up to 51,200 line FFT analysis.

9034 & 9038 Features & Benefits

Features:

  • 4 accelerometer channel & 8 accelerometer channel versions
  • 24VDC (relay drive) switched output for each channel (warning/critical, g or velocity)
  • 4 to 20mA output for each channel (g or velocity)
  • Temperature input
  • Tacho Input
  • USB for connection to Smart Vibration Monitor PC software
  • Ethernet socket for connection to Online Vibration analysis software

Advantages:

  • Extremely cost effective – lowest cost/channel industrial vibration monitor/analyser
  • Very easy to set up using Smart Vibration Monitor PC software
  • 24/7 monitoring of critical plant operations

Benefits:
Single low-cost unit monitors plant with local alarms, connects to high functionality PC analysis software.

Product Documentationpdf-icon1

Click below to view or download product documentation PDFs:

903x Data Sheet

Read about the 9034 & 9038 as Featured in Instrumentation Magazine

 Model 9034 & 9038 Specifications
  9034   9038
 Measurement
IEPE Accelerometer Input Channels 4 8
Accelerometer Sampling Frequency 2Hz - 25.6kHz
4-20mA Output Channels 4 8
24VDC Digital Outputs 4 8
24VDC Dig. Output Current Max 100mA
Digital Output Alarm Acceleration or Velocity (Channel Selectable)
Tachometer Input 1 (0V to any voltage upto +24VDC)
Frequency Dependent Alarms Yes (using Tachometer)
Temperature Input 1 (Typically 10mV/°C)
PC Connection USB
Internet/Cloud Connection Ethernet
 PC Software
Vibration Alarms 4 Vibration 8
Temperature Alarm 1 Temperature 1
Alarm Choice Acceleration AND/OR Velocity (channel selectable)
FFT Up to 51,200 lines
Time Waveform Yes
 Electrical
Supply Voltage USB or 24VDC
Supply Current 500mA
 Mechanical
Environmental IP50
Operating Temperature °C 0-55°C (32-151°F)
Storage Temperature °C 0-55°C (32-151°F)
Mounting DIN Rail
Part Number 9034 9038

May we provide additional assistance? We appreciate your interest in TPI Vibration Analysers  & Machinery Health Monitoring tools. Please provide us with a few details below and we will be pleased to assist you directly.

CBM Sales
Please provide model number(s), type of instrument(s), or specific inquiries
Sending

Back To Top